HeatersPlus.com Questions? 1-800-442-2581 |
Our secure online ordering website: www.MorElectricHeating.com.
|
|
Home | Ordering | Contact Us | Heaters | Controls | Accessories | Search | ||
Eemax De-Ionized Tankless Instantaneous Water Heaters
We are a distributor for Eemax Inc.
The most cost effective method for heating de-ionized water for all your manufacturing requirements.
Eemax de-ionized units are available in both single phase and 3-phase voltage formats.
The Eemax Ultrapure (DI) water heaters are capable of heating water of the highest purity (up to 18 meg OHM quality) and do it affordably.
Eemax Inc. makes two heater types.
1.
This
is a smaller sized heater. This would ideally
serve one or two washing stations.
Temperatures controlled +/- 1 F.
Comes in various powers (3kW through 10kW,) and voltages.
Heat the highest purity water.
Easy Installation.
Test Proven by independent analytical laboratories.
The units are small in size at 103/4" by 51/4" and 21/8" deep.
Use one of these heaters when flow rates are
up to 2.0 gpm.
Water carrying materials are PVDF "Kynar" and 316 stainless steel wetted
surfaces.
2.
This is our three phase model. These units are used for higher flow rates such as multiple washing stations. They can be built to suit practically any three phase voltage type.
Temperatures controlled +/- 1 F.
Comes in various powers (18kW through 32kW,) and voltages.
Heat the highest purity water.
Easy Installation.
Test Proven by independent analytical laboratories.
The dimensions of these units are 12" by 12" and 31/2" deep.
Use one of these heaters when flow rates are over
1.5 gpm.
Water carrying materials are PVDF "Kynar" and 316 stainless steel wetted
surfaces.
SPECIFICATIONS
SINGLE PHASE ELECTRICAL and TEMPERATURE
RATINGS:
MODEL |
VOLTS |
kW |
AMPS |
Temperature Rise F at /GPM |
|
|
|
|
|
1 GPM |
1.5 GPM |
EX55(T)DI |
240V |
5.5 |
23 |
38º |
25º |
EX75(T)DI |
240V |
7.5 |
32 |
51º |
34º |
EX95(T)DI |
240V |
9.5 |
40 |
63º |
43º |
EX60(T)DI |
277V |
6.0 |
22 |
41º |
27º |
EX80(T)DI |
277V |
8.0 |
29 |
55º |
36º |
EX100(T)DI |
277V |
10.0 |
36 |
68º |
46º |
(T) Denotes "Thermostatic" version available
where the temperature can be set +/- 1ºF
THREE PHASE ELECTRICAL and TEMPERATURE RATINGS:
MODEL |
VOLTS |
kW |
AMPS/phase |
Temperature Rise F at /GPM |
|||
1.5 | 2.0 | 2.5 | 3.0 | ||||
EX180(T3) DI |
480/277 |
18 |
22 |
82º | 61º | 49º | 41º |
EX240(T3) DI |
480/277 |
24 |
29 |
109º | 82º | 65º | 54º |
EX320(T3) DI |
480/277 |
32 |
39 |
- | 109º | 87º | 73º |
(T3) Denotes "Thermostatic" version available where the temperature can be set +/- 1ºF
|
ADVANCED TECHNOLOGY
|
Eemax "DI" Water Heaters have been type tested by a reputable, independent Analytical Testing Laboratory. Test conclusions verified no measurable contamination of water passing through the Eemax heater. Test results available upon request.
WHY HOT "DI" (DE-IONIZED) WATER?
EEMAX ULTRAPURE "DI" HEATER
MODEL |
VOLTS |
kW |
|
EX55TDI |
240V |
5.5 |
|
EX65TDI |
240V |
6.5 |
|
EX75TDI |
240V |
7.5 |
|
EX95TDI |
240V |
9.5 |
|
EX8208TDI |
208V |
8.3 |
|
EX60TDI |
277V |
6.0 |
|
EX80TDI |
277V |
8.0 |
|
EX90TDI |
277V |
9.0 |
|
EX100TDI |
277V |
10.0 |
|
EX180T3DI |
480/277 |
18 |
|
EX240T3DI |
480/277 |
24 |
|
EX320T3DI |
480/277 |
32 |
|
EX280T3DI |
Single Phase 240V/208V |
28 |
We are a Distributor of Industrial, Commercial and Residential Heaters and Controls. Always consult manufacturers installation instructions for proper installation of the products or systems shown on this website. © Copyright 1999-2019 Mor Electric Heating Assoc., Inc. MOR
ELECTRIC HEATING ASSOC., INC. |