Eemax Series Two Tankless Instantaneous Water Heaters

HeatersPlus.com

Questions? 1-800-442-2581
8:00am-5:00pm M-F (Eastern Time)

Our secure online ordering website: www.MorElectricHeating.com.
Our other websites: www.InfraredHeaters.com and www.Fans-Plus.com.

Eemax Series Two Tankless Instantaneous Water Heaters

Eemax Electric Tankless Instantaneous Water Heaters
We are a distributor for Eemax Inc.

EX190T, EX144T

For your whole house or condo, the model you require is the EX190T or EX144T.

These units will provide 0.75-2.5 GPM of showering temperature water. Cold water inlet only.

These units are best served when serving only one major outlet at a time.

EX190T2, EX144T2

Ideally suited for any booster type application. These units will supply hot water up to 180 F.

They can be fed with either hot or cold water.

EX190P2, EX144P2

These models are perfect for mop sinks and industrial higher water flow rate applications.

Flow rates of up to 3 GPM with cold water inlet only.

Temperature controlled by the flow rate of water.

Specifications

"RESIDENTIAL MULTI POINT"

ELECTRICAL and TEMPERATURE RATINGS:

MODEL	VOLTS	kW	AMPS	Temperature Rise at/GPM					Wire Size
				1.0	1.5	2.0	2.5	3.0	AWG
EX1608T	208V*	16.6kW	77(2x38.5)	-	-	55º	45º	38º	8
EX144T	240V*	15kW	64(2x32)	102º	65º	51º	39º	34º	8
EX190T	240V*	19kW	80(2x40)	130º	87º	65º	52º	43º	8
EX160T	277V	16kW	58(2x29)	110º	73º	55º	44º	32º	8
EX200T	277V	20kW	72(2x36)	130º	91º	68º	54º	21º	10

This unit is ideal for serving an entire condo, apartment, smaller house or cabin. It would replace the existing tank type water heater, being fed with cold water only. Minimum switch on flow rate 0.75 GPM. Easily adjustable thermostat gives exact temperature control.

APPLICATIONS:
Residential Showers
Industrial Processes
Photo Processing
Adjustable, Precise Temperature Setting ±0.5°F.

"COMMERCIAL FLOW CONTROLLED"

ELECTRICAL and TEMPERATURE RATINGS:

emax4_1.gif (29422 bytes)

MODEL	VOLTS	kW	AMPS	Temperature Rise at/GPM				Wire Size
				1.5	2.0	2.5	3.0	AWG
EX1608P2	208V*	16.6kW	77(2x38.5)	-	55º	45º	38º	8
EX144P2	240V*	15kW	64(2x32)	65º	51º	39º	34º	8
EX190P2	240V*	19kW	80(2x40)	87º	65º	52º	43º	8
EX160P2	277V	16kW	58(2x29)	86º	55º	43º	32º	8
EX200P2	277V	20kW	72(2x36)	55º	41º	27º	21º	10

"PARALLEL" Flow Control Models (Twin Module). Recommended for higher flow rate hot water applications.
Fitted with ½" compression fittings and bottom entry electric. Feed with cold water only
(i.e. Industrial Processes). Min. flow 1.5 GPM.

APPLICATIONS:
·Industrial Processes
·High Flow Activation
·Cold Water Feed Only
·Laboratories

"COMMERCIAL HIGH FLOW BOOSTER"

ELECTRICAL and TEMPERATURE RATINGS:

MODEL	VOLTS	kW	AMPS	Temperature Rise at/GPM				Wire Size
				1.5	2.0	2.5	3.0	AWG
EX1608T2	208V*	16.6kW	77(2x38.5)	-	55º	45º	38º	8
EX144T2	240V*	15kW	64(2x32)	65º	51º	39º	34º	8
EX190T2	240V*	19kW	80(2x40)	87º	65º	52º	43º	8
EX160T2	277V	16kW	58(2x29)	86º	55º	43º	32º	8
EX200T2	277V	20kW	72(2x36)	55º	41º	27º	21º	10

"PARALLEL" Models (Twin Module) With Two Thermostats
For preheated water feed (dishwashers, photo processing, etc.). Min. flow, 1.5 GPM.

APPLICATIONS:

Commercial Dishwashers

Photo Processing

Booster (Solar}

Commercial/Industrial

Adjustable, Precise Temperature Setting ±0.5°F (up to 180°)

QUALITY FEATURES

On Demand Hot Water - no delay.
Continuous Hot Water - no storage capacity to run out.
Reduces Installation Cost - no T & P relief valve needed (check local codes).
Easy Installation - only one cold water line need be brought to lavatory - integral ½" compression fittings on bottom (no sweat connections).
Cut Energy Waste - flow switch activates heater only on demand (no standby heat loss).
Available thermostatic control "T" helps insure accurate outlet temperatures (±0.5°F).
Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
Compact Size - dimensions 10"x9"x3"; weight 8 lbs.
Reduces calcification.
Field Serviceable Elements replaceable cartridge element (1 year warranty).
Warranty - Full Factory Warranty - Heaters are guaranteed against the failure due to leaks of "Heater Body/Element Assembly" for a period of TEN YEARS.
Unit must be mounted on wall.

SPECIFICATIONS:
Dimensions: 10"x9"x3"
Weight: 8 lbs.
Materials:
Cover: Enameled Steel.
Glass reinforced "NORYL"* Heater Body
and Ni Chrome Element
Color: White
Element: Dual replacement cartridge inserts
Pipe-Fittings: ½" compression at bottom of unit.
U.S. Patent #'s: 4,960,976 and 4,762,980
*NORYL is a registered trademark of General Electric Company

SPECIAL DESIGN SERVICE INQUIRIES FOR UNITS FOR UNIQUE APPLICATIONS ARE WELCOME. CONTACT US.

All units must have 2 independent electrical circuits using correctly rated wire and 2 circuit breakers.
Recommended Wire Size is per module

MODEL	VOLTS	kW
EX1608T	208V*	16.6kW
EX144T	240V*	15kW
EX190T	240V*	19kW
EX160T	277V	16kW
EX200T	277V	20kW
EX1608P2	208V*	16.6kW
EX144P2	240V*	15kW
EX190P2	240V*	19kW
EX160P2	277V	16kW
EX200P2	277V	20kW
EX1608T2	208V*	16.6kW
EX144T2	240V*	15kW
EX190T2	240V*	19kW
EX160T2	277V	16kW
EX200T2	277V	20kW

[ Home ] [ Up ]

We are a Distributor of Industrial, Commercial and Residential Heaters and Controls. Always consult manufacturers installation instructions for proper installation of the products or systems shown on this website. Â© Copyright 1999-2019 Mor Electric Heating Assoc., Inc.

MOR ELECTRIC HEATING ASSOC., INC.
5880 Alpine Ave. NW - Comstock Park, MI 49321 USA
Tel 616-784-1121 - 800-442-2581 - Fax 616-784-7775
E-mail: sales@heatersplus.com